Fly-in gear
Fly-in camping gear
Gear for landing somewhere without a ramp and staying the night: holding the airplane down, keeping it covered, and camping under the wing. Some of it we make. The rest we write up from published specs, and we say which is which.

- Tie-downs and anchorsWhat holds in dirt, sand, gravel and rock, from screw-in anchors to drilled pins.
- Covers, plugs and fuel testingWing covers, engine plugs, pitot covers, fuel samplers, chocks, tow bars and cargo nets.
- CampWing shelters and tents, stoves, water, bear safety, survival kits and a way to call for help.
- Printed partsNine holders and tools we designed and print in Onalaska. Coming soon.
- Fly-in tie-down kitScrew-in anchors for soft ground, with a drilled rock option. Coming soon.
- Buyer's guidesPlain write-ups built from published specs. Field notes come after we use the gear.
What is for sale: nothing in this section yet. The printed parts and the tie-down kit are designs. They show as coming soon and are not in the checkout.
How the guides work: they are buyer's guides built from makers' published specs. We do not claim to have tested anything we have not used, and there are no ratings. Field notes come later.
Made by Ridgelift
Designed in parametric CAD and printed without supports, with rounded corners and edges. Coming soon.
-
RL-CG-101 · Coming soonFuel Tester Holster
Carries a cup-style fuel sampler on a belt or bag strap, with a drain hole and a window so you can see it is there.
-
RL-CG-102 · Coming soonTie-Down Rope Keeper
A flat winder for one tie-down rope, with a jam slot for the tail and a hang hole.
-
RL-CG-103 · Coming soonCover Keeper Clip
Snaps onto a 1 in tube and holds the lanyards of a pitot cover and plugs, so they stay together when they are off the airplane.
-
RL-CG-104 · Coming soonPrinted Wheel Chock
A light chock with a curved face, printed in a high-visibility color, with a bore for the rope that joins the pair.
-
RL-CG-105 · Coming soonStrut Gear Hanger
A hook that hangs over a round tube up to 34 mm across and holds a headlamp, water bottle, hat or small bag at camp.
-
RL-CG-106 · Coming soonAnchor Pin Caddy
A six-hole block that keeps drilled rock pins, removable anchors and drill bits upright and counted in the tie-down bag.
-
RL-CG-107 · Coming soonCap Tether Clip
A small snap hook with a flexible gate and an eye for cord, for clipping a cap lanyard or cover streamer where you expect to find it.
-
RL-CG-108 · Coming soonWing Tarp Pole Cap
A wide cap for the end of a tent pole that holds a tarp grommet at the outer edge of a wing shelter.
-
RL-CG-109 · Coming soonRotary Hammer Bit Case
A two-piece tube with a friction cap that carries three SDS-Plus bits and a hole brush or blower nozzle.
Get word when the gear is ready.
One waitlist for the whole shop. No payment and no deposit.