Coming soon
Rotary Hammer Bit Case
A two-piece tube with a friction cap that carries three SDS-Plus bits and a hole brush or blower nozzle.

Masonry bits are sharp, oily and heavy. Loose in a bag, they cut through everything else. The case keeps three bits and a hole brush apart, upright and capped.
Body and cap print separately, both standing up, with no supports. The cap is a friction fit on a stepped neck.
$34, coming soon
Coming soon. Not for sale yet: there is no checkout for this item.
- Part number
- RL-CG-109
- Size
- 53 mm across, 174 mm long with cap
- Fits
- Three bores 13 mm across for bits up to 12 mm and 160 mm long, plus one 16 mm bore.
- Material
- PETG
- Printed mass
- About 198 g each (slicer estimate)
- Print time
- About 6.2 h each on one printer (slicer estimate)
- Supports
- None
- Made in
- Onalaska, Washington
Limits
- The fit depends on the printer. If the cap is loose, a wrap of tape on the neck fixes it; if it is tight, scale the cap 0.5 percent larger.
- Not tested in the field yet. Field notes and any load numbers will be added here when we have them.
Other printed parts
-
RL-CG-101 · Coming soonFuel Tester Holster
Carries a cup-style fuel sampler on a belt or bag strap, with a drain hole and a window so you can see it is there.
-
RL-CG-102 · Coming soonTie-Down Rope Keeper
A flat winder for one tie-down rope, with a jam slot for the tail and a hang hole.
-
RL-CG-103 · Coming soonCover Keeper Clip
Snaps onto a 1 in tube and holds the lanyards of a pitot cover and plugs, so they stay together when they are off the airplane.
Get word when the gear is ready.
One waitlist for the whole shop. No payment and no deposit.