Coming soon
Printed holders and tools
Nine small parts that give loose things a place to live. Each one is a parametric CAD model, prints without supports, and has rounded corners and edges so it is kind to hands, bags and paint.
-
RL-CG-101 · Coming soonFuel Tester Holster
Carries a cup-style fuel sampler on a belt or bag strap, with a drain hole and a window so you can see it is there.
-
RL-CG-102 · Coming soonTie-Down Rope Keeper
A flat winder for one tie-down rope, with a jam slot for the tail and a hang hole.
-
RL-CG-103 · Coming soonCover Keeper Clip
Snaps onto a 1 in tube and holds the lanyards of a pitot cover and plugs, so they stay together when they are off the airplane.
-
RL-CG-104 · Coming soonPrinted Wheel Chock
A light chock with a curved face, printed in a high-visibility color, with a bore for the rope that joins the pair.
-
RL-CG-105 · Coming soonStrut Gear Hanger
A hook that hangs over a round tube up to 34 mm across and holds a headlamp, water bottle, hat or small bag at camp.
-
RL-CG-106 · Coming soonAnchor Pin Caddy
A six-hole block that keeps drilled rock pins, removable anchors and drill bits upright and counted in the tie-down bag.
-
RL-CG-107 · Coming soonCap Tether Clip
A small snap hook with a flexible gate and an eye for cord, for clipping a cap lanyard or cover streamer where you expect to find it.
-
RL-CG-108 · Coming soonWing Tarp Pole Cap
A wide cap for the end of a tent pole that holds a tarp grommet at the outer edge of a wing shelter.
-
RL-CG-109 · Coming soonRotary Hammer Bit Case
A two-piece tube with a friction cap that carries three SDS-Plus bits and a hole brush or blower nozzle.
How they are made
Every part is a parametric model, so a different tube size, sampler size or pole size is one number, not a redraw. Each part prints in the orientation it was drawn, with no support material. Shapes are drawn as profiles that build straight up, every downward face is 45 degrees or steeper, and horizontal openings have pointed roofs instead of flat bridges. Corners and top edges are rounded; the edge on the print bed gets a small chamfer instead, because a rounded bottom edge would need support.
Mass and print time on each page come from slicing the part in PETG at 0.2 mm layers with four walls. They are estimates until the first batch is printed.
Coming soon. Not for sale yet: there is no checkout for this item.
Get word when the gear is ready.
One waitlist for the whole shop. No payment and no deposit.