Coming soon

Cap Tether Clip

A small snap hook with a flexible gate and an eye for cord, for clipping a cap lanyard or cover streamer where you expect to find it.

Render of the Cap Tether Clip in its print orientation.
Rendered from the CAD model, in the orientation it prints.

Fuel caps, oil caps and cover streamers have a way of ending up on the wing walk or in the grass. The clip is a light snap hook you tie to the end of a lanyard so it can be clipped to a tie-down rope, a bag loop or the cover keeper.

The gate is printed in place with a small gap at the tip, so it flexes open and springs back.

$14 (set of 3), coming soon

Coming soon. Not for sale yet: there is no checkout for this item.

Part number
RL-CG-107
Size
25 x 54 x 7 mm
Fits
Eye for 4 to 6 mm cord. The hook opens to about 10 mm.
Material
PETG, solid
Printed mass
About 4 g each (slicer estimate)
Print time
About 0.1 h each on one printer (slicer estimate)
Supports
None
Made in
Onalaska, Washington

Limits

  • It is not a retainer for anything in flight and must not be used as one.
  • It is printed plastic. Do not use it for climbing, rigging or anything that holds a person or a load.
  • Not tested in the field yet. Field notes and any load numbers will be added here when we have them.

Get word when the gear is ready.

One waitlist for the whole shop. No payment and no deposit.

Free. No payment and no deposit. News only, and every email we send has an unsubscribe link. If the signup service cannot be reached, this opens a message to hello@ridgeliftaero.com for you to send. See the Privacy Policy.