Sticker creator: hanging on the prop

A stick figure hanging off a turning prop with both hands, which is roughly how slow flight at full power feels. Set the line, the pose, the prop, and the colors, then download print files sized for a sticker printer. It all runs in your browser.

Drawing the sticker

    For Sticker Mule, upload the PNG. It is the finished size at 300 dpi with a transparent background, and they cut along its edge, so add no border of your own. The SVG print file adds 1/16 in of bleed on every side. The cut path SVG uses the same artboard, for printers that ask for a separate CutContour. Keep important text 1/8 in inside the cut; the layouts here already do. The vinyl cut SVG is a single-color file of closed filled paths, sized in inches, for a vinyl cutter.

    Capitals only. Put a | where you want a line break.

    Pose
    Prop
    Gear below the cowl, seen nose-on
    Colors three inks plus white vinyl
    Shape
    Size long side
    Extras

    What the files are

    PNG
    Finished size at 300 pixels per inch, transparent outside the cut. A 3 in die-cut is about 900 pixels on the long side.
    SVG print file
    Vector art with all text turned into outlines, so no fonts are needed. Layers: Bleed and Artwork. Sized in inches.
    Cut path SVG
    One closed path named CutContour, on the same artboard as the print file.
    Die-cut border
    About 0.09 in of white vinyl around the colored field, and 0.16 in from the art to the cut.
    Bumper
    11.5 x 3 in with rounded corners.

    Want a line on a shirt or mug instead? See the 37 lines in 3D, or go back to the shop.